Just active- porcelain stoneware project tiles collection -Porcelaingres

Active Clean Air & Antibacterial Ceramic™ is the latest form of ceramics that helps to purify the air that we breathe offering cleaner, more hygienic and ultimately healthier floors and coverings, which also reflects on the environment in which we live. ACTIVE has transformed Porcelaingres slabs into an exceptional eco-active, non-polluting and antibacterial material thanks to the action of micrometer titanium dioxide (TiO2) applied to the slabs at a high temperature. Through simple exposure to light this activates the photocatalysis process, which is responsible for the product‘s anti-pollution and bactericidal properties.

Active Clean Air & Antibacterial Ceramic™ is environmentally friendly: 1,000 m² of ACTIVE material has the same beneficial effect of 20 mature trees. The effectiveness of ACTIVE has been certified by the TCNA (Tile Council of North America) and the Centro Ceramico Bologna. Furthermore, the CSTB (Centre Scientifique et Technique du Bâtiment) has assigned the Pass’Innovation to ACTIVE, which authoritatively proves its innovative value.

Active Clean Air & Antibacterial Ceramic™ is clean: outdoor coverings made with ACTIVE slabs are dirt repellent, as photocatalysis prevents smog from settling on them. This practically eliminates the need to use detergents.

Active Clean Air & Antibacterial Ceramic™ is safe: tests performed on ACTIVE slabs guarantee their effective ness both as outdoor and indoor coverings and as fl ooring. Thanks to their properties, ACTIVE slabs are suitable (in fact recommended) for environments where cleanliness, sanitation and hygiene are important requirements: residences, wellness centres, hotels, restaurants, gyms, schools, surgeries, laboratories and hospitals.

Just active-desert rose collection

Technical Information:

Surface:natural

Thickness:10 mm

Format:45 x 45 cm, 60 x 60 cm, 60 x 30 cm, 90 x 45 cm

Just active-dove grey

Technical Information:

Surface:natural

Thickness:10 mm

Format:45 x 45 cm, 60 x 60 cm, 60 x 30 cm, 90 x 45 cm

Porcelaingres GmbH
Irisstraße 1
03226 Vetschau – Germany
Tel +49 (0) 35433 597 0
Fax +49 (0) 35433 597 170
www.porcelaingres.com

Andy blick tile collection – Ann Sacks tiles

A unique and modern line, this superb hard-edge decorative style anticipates the effects of light and shadow, creating a dynamic, striking visual presence.

Andy Blick collection -discus in matte white, shown with metro crisp twister gloss. Hammer & schmidt inc. design by peggy hammerschmidt

visor E10 in bright white gloss

visor E10 in bright white gloss

lattice
3″ x 3″

http://www.annsacks.com

ANN SACKS – Los Angeles
8935 Beverly Boulevard
Los Angeles, CA 90048

Hours: Monday through Friday 9am-5pm
Closed Saturday & Sunday or call for an appointment

Abyssinian tile collection – Ann Sacks tile collections

This highly carved tile adds drama to an installation without using color. Field pieces create optical illusions by using shapes that interlock from tile to tile. Crisp, high lines add to the quality and overall look of the program.

Harlequin deco in 200 bright white matte

abyssinian 3″ x 8″ crown molding, harlequin molding, montage mini and 4″ x 4″ field in jasper sw05, tra vigne restaurant, california

http://www.annsacks.com

ANN SACKS – Los Angeles
8935 Beverly Boulevard
Los Angeles, CA 90048

Hours: Monday through Friday 9am-5pm
Closed Saturday & Sunday or call for an appointment

Seta wall/floor tile collection -300X300 tiles

The ideal dress for an important room, made by weaving matter into multicolor textures that dress the space with Italian sartorial taste.Every tile is individually decorated and finished by hand, making each one a unique piece.

Porcelain stoneware floor/wall tile decorated by hand- 300X300 tiles.

http://www.lifetile.it

HomeStudio S.r.l – Via Monte Bianco 91 – 41042 – Fiorano Modenese (MO) – Italy – VAT ID and C.F.

A unique and extraordinary blend of elegance and craftsmanship; inspired by the technique of the Italian goldsmith masters, each tile of the Cesello collection embellishes any space with the beauty of a timeless jewel.

Every tile is individually decorated and finished by hand using precious metals like 24k gold and pure platinum, making each one a unique piece.

White Gold

White-body 300X300 monoporous wall tile decorated by hand using gold and high quality glass powder.

White 300X300

White-body monoporous wall tile decorated by hand using high quality glass powder.

Porcelain stoneware wall tile decorated by hand using gold and high quality glass powder.

Tiles 200X200

HomeStudio S.r.l – Via Monte Bianco 91 – 41042 – Fiorano Modenese (MO) – Italy – VAT ID and C.F.

http://www.lifetile.it

Two-component, epoxy adhesive with no vertical slip for ceramic tiles and stone material.
Applications:
- Anti-acid bonding of all types and shapes of ceramic tiles, on all types of substrates used in the building industry.
- Bonding tiles in fibreglass swimming pools.
- Bonding marble doorsteps and window sills.
- Bonding rigid strakes and special ceramic items.
Technical data:
Pot life of mix: 45 minutes.
Open time: 60 minutes.
Set to light foot traffic: approx. 10-12 hours.
Ready for use: 2 days.
Colour: grey.
Application: nº 4, 5, 6 or 10 notched trowel.
Storage: 24 months.
Consumption
1.5 kg/m2 per mm of thickness.
Packaging
10 kg units.

English Technical Data Sheet

USES
• For setting all types of glazed and unglazed ceramic floor and wall tiles
• For residential and light commercial interior installations of wall tiles up to
8″ x 8″ (20 x 20 cm), and ceiling tiles up to 6″ x 6″ (15 x 15 cm)
• For interior residential floor and countertop tile up to 6″ x 6″ (15 x 15 cm)
in dry areas only
• For backsplashes, tub surrounds and shower surrounds over a precast
shower base where service requirements do not exceed those of ANSI
A136.1, Type 1 or CGSB 71-GP-22M Type 1 (Canada) standards
• Ker 909 is nonflammable and has a minimal odor, making it ideal for tile
installations in confined or restricted areas.

USES
• For setting all types of glazed and unglazed ceramic floor and wall tiles
• For residential and light commercial interior installations of wall tiles up to
8″ x 8″ (20 x 20 cm), and ceiling tiles up to 6″ x 6″ (15 x 15 cm)
• For interior residential floor and countertop tile up to 6″ x 6″ (15 x 15 cm)
in dry areas only
• For backsplashes, tub surrounds and shower surrounds over a precast
shower base where service requirements do not exceed those of ANSI
A136.1, Type 1 or CGSB 71-GP-22M Type 1 (Canada) standards
• Ker 909 is nonflammable and has a minimal odor, making it ideal for tile
installations in confined or restricted areas.

DESCRIPTION
USES
• For setting all types of glazed and unglazed ceramic floor and wall tiles
• For residential and light commercial interior installations of wall tiles up to
8″ x 8″ (20 x 20 cm), and ceiling tiles up to 6″ x 6″ (15 x 15 cm)
• For interior residential floor and countertop tile up to 6″ x 6″ (15 x 15 cm)
in dry areas only
• For backsplashes, tub surrounds and shower surrounds over a precast
shower base where service requirements do not exceed those of ANSI
A136.1, Type 1 or CGSB 71-GP-22M Type 1 (Canada) standards
• Ker 909 is nonflammable and has a minimal odor, making it ideal for tile
installations in confined or restricted areas.is a ready-to-use, nonflammable, high-viscosity, synthetic polymer
emulsion-based adhesive.
• Easy to trowel on floors/walls
• Nonslip for vertical use

USES
• For setting all types of glazed and unglazed ceramic floor and wall tiles
• For residential and light commercial interior installations of wall tiles up to
8″ x 8″ (20 x 20 cm), and ceiling tiles up to 6″ x 6″ (15 x 15 cm)
• For interior residential floor and countertop tile up to 6″ x 6″ (15 x 15 cm)
in dry areas only
• For backsplashes, tub surrounds and shower surrounds over a precast
shower base where service requirements do not exceed those of ANSI
A136.1, Type 1 or CGSB 71-GP-22M Type 1 (Canada) standards
• Ker 909 is nonflammable and has a minimal odor, making it ideal for tile
installations in confined or restricted areas.

English  Technical Data Sheet

One component, highly deformable, high performance, rapid-setting and hydration cementitious adhesive, which is easy to apply by trowel with no vertical slip and extremely high yield, for ceramic tiles and stone material.

For bonding all types and sizes of ceramic tiles, mosaics, and stone material which are not particularly sensitive to damp, on traditional internal and external floors and walls with cementitious render, cementitious and anhydrite screeds, plaster walls (after application of a suitable primer), internal cellular concrete walls, plasterboard, heated floors, painted internal walls (if the paint is well bonded), old marble, terrazzo and ceramic floors and waterproofing substrates with MAPEI waterproofing anti-fracture membrane.

N.B. The high deformability of the product makes it particularly suitable for bonding on deformable substrates (marine board, wooden agglomerates which are sufficiently stable in the presence of water, old wooden floors, etc.), concrete, cementitious screeds which are not completely cured and for laying even large-sized ceramic tiles and stone material on facades, balconies, terraces, slabs floors, exposed to direct sunlight and temperature gradients. Suitable for applications on existing flooring during cold weather.

Thanks to its extraordinary bonding and quick drying characteristics, Ultraflex S2 Quick is particularly recommended for quick restructuring work where immediate installation is required (public buildings, transport cafes, supermarkets, airports and pedestrian areas).

Ultraflex S2 Quick also helps in reducing the noise caused by footsteps.

Technical data:

• Pot life of mix: 30 minutes.
• Open time: 15-20 minutes.

Grouting:

• - on walls: after 2-3 hours;
• - on floors: after 5-6 hours.
• Set to light foot traffic: 5-6 hours.
• Ready for use: 24 hours.
• Deformability according to EN 12002: S2 – highly deformable.
• Colour: grey.
• Application: nº 4, 5, 6 or 10 notched trowel.
• Storage: 12 months.

Consumption
0.9 kg/m2 per mm of thickness, equal to 1.5-2.5 kg/m2.

Packaging
15 kg bags.

Ultraflex S2 Quick is CE marked, as declared in ITT certificate nº 25070199/Gi (TUM) issued by the Technische Universität München laboratory (Germany)

English Technical Data Sheet

Ultrarapid-setting flexible cement based powder adhesive for ceramic tiles (thicknesses of adhesive up to 7 mm).

Interior and exterior bonding of all types of ceramic floor and wall tiles (double fired tiles, single fired, porcelain tiles etc) on:

– old floors and walls (ceramic tiles, natural stone, terrazzo, concrete) provided they are solid and clean;
– cast concrete, properly cured prefabricated concrete panels (at least 4 months old), heating panels, reinforced cement panels, plaster boards, provided they are firmly fixed.

Particularly suitable for works where rapid repairs are required spacing.

N.B.: mixing with Latex Plus
(6 kg of Latex Plus for each 20 kg bag of Keraquick) provides increased deformability (S2), without changing the other positive features of Keraquick.

Coverage
2.5-4 kg/m2.

Packaging
20 kg bags grey, 20 kg bags white, 4×5 kg packs.

English  Datasheet